We specialize in the grinding of thermoplastic, thermosetting, composites, and in both end feed and through feed.
Centerless Grinding is a machining process that removes material from the outside of a cylindrical item through the method of abrasive cutting in order to achieve the desired diameters, smoothness and roundness.
The concept is relatively simple. The workpiece is fed between two wheels rotating at different speeds. The grinding wheel rotates at a speed that applies a downward force to the workpiece and grinds the workpiece while holding it in place.
The regulating wheel (or moving wheel) applies lateral force to the workpiece and controls the rotational speed. These wheels can have a variety of grain types and grit sizes, such as polycrystalline diamond or cubic boron nitride. The different grit sizes on the wheel produce different diameters, widths, and thicknesses.
The speed in which the two wheels move in relation to each other will determine the how much material is removed from the workpiece.
The most common types of centerless grinding are Through Feed and Infeed. Through-Feed Centerless Grinding is used for parts with consistent roundness across their length. The regulating wheel is positioned at an incline, which enables the wheel to both rotate the workpiece against the grinding wheel while moving the along the grinding wheel laterally. Infeed Grinding Centerless Grinding is the simpler of the two. It is used for cylindrical parts with complex shapes or notches. The workpiece rest blade is tooled to match the part’s shape. The grinding and regulating wheels must also match the workpiece’s profile cut.